open mini netbook

open project of mini netbook, 7'' ARM netbook


You are not connected. Please login or register

From Sweden Need Help Please

View previous topic View next topic Go down  Message [Page 1 of 1]

1 From Sweden Need Help Please on Wed 4 Aug 2010 - 19:29

tavring


I have a
ANYKA ak7802tq21605
ARM 926EJ-S
Release SV122
Recently dissembled it

I'm new at this forum and have read many hours on different sites regarding this.
I wonder if someone have some time left to help figure some questions out,

Default it came with wince 5.0, i somehow messed it up trough bios.
My questions is
1.Is it possible to uppgrade this?
2.Can i recover it?
3.I have usb/sd reader, with 2gb SD and one 1gb SD.
tried almost everything,fat32,with script copied to the SD.

I have tried many different version of wince6.0 files and some recovery files.
nothing works Mad

So if you have some time over

Regards

Tavring

2 Re: From Sweden Need Help Please on Wed 11 Aug 2010 - 12:42

tavring


Hello

Nobody who wants to help a friend,
do you have time left?

Do i need to flash the netbook?

3 Re: From Sweden Need Help Please on Mon 16 Aug 2010 - 23:33

Oto


Master
Master
What problem do you have? If it is messed up you should reflash.

4 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 13:23

tavring


My rom is 1.90

[You must be registered and logged in to see this link.]

my computer did find the netbook, boot i couldn't find the drivers for the rom?

I have downloaded and installed active sync, my wince 5.0 is messed up,
please give me some guidelines.

Thank You for your time

5 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 13:33

Oto


Master
Master
Active sync wont work with this notebook.

What you did in the bios? reformatted XIP, Flash2, NAND?
Do you have USB-USB cable?

The recover is simple as written in link, follow it and it will be fine

Choose RAM=DDR
And type of burn=Factory reset
[You must be registered and logged in to see this link.]

6 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 13:40

tavring


I did it all, Sad

I did buy a USB-USB cable from ebay, and did make my computer find the netbook.
but couldn't install it.

Should i download the 1.86? install so the driver find the netbook,
then use the burntool.exe?

Thank you for your fast replay.

7 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 13:47

Oto


Master
Master
>but couldn't install it.

Why not? be more specific.
Did you install drivers?
What OS do you have WinXP,Win7, Vista?
What ROM are you trying to burn?

I do this(after drivers are installed):
1.Run burntool, set all the options then back to main screen and only then keep holding switch and connect USB cable.
2.Then Burntool should find the device and then click Start and keep holding switch until done

8 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 13:52

tavring


I have the 1.90 ROM
And a WinXp computer.

I´m trying in the moment download and installing the 1.86 from CnM.
while holding the switch, continue holding switch and then run burntool.exe?

thank you for a fast replay

9 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 13:55

Oto


Master
Master
You need to hold switch only before clicking "Start" and then keep holding the whole process.

Drivers are installed?

10 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 14:01

tavring


yes it ask me for password?
holding switch right now Razz

11 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 14:04

Oto


Master
Master
burntool password is anyka

12 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 14:06

tavring


OK, pw is anyka, but witch file do i put in so i get my wince 5.0 working?

13 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 14:19

Oto


Master
Master
As in the picture. As you didn't tell what exactly you messed up reflash everything, it is safe don't worry

XIP(Execute in place) is windows ROM area but I think it is not possible to reflash only one file.

14 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 14:46

tavring


The WinCe 5.0 is saying " installing etc" then it hangs up.
I download the 1.86 "switched" the netbook and installed the drivers on my winxp computer.

I have problem using the burntool software,
"can not find shared.... xip.nb0"
" I hold the switch all the time"

thank you for your help but i need to know how to use burntool so i can get my netbook work on wince 5.0

tank you

15 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 15:05

Oto


Master
Master
>The WinCe 5.0 is saying " installing etc" then it hangs up

It doesn't say installing but "initializing system". If it doesn't get past boot screen it means Windows ROM area is bad.

Download 1.9 ROM it worked for me perfectly, somewhere was a link and didn't need Knights permission. Without working netbook you will never get to Knights permission here so it is little bit silly Rolling Eyes

16 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 15:10

tavring


Ok thank you for your fast replay Very Happy

If i got this right:
1. Download 1.9 Rom files
2. Set up burntool with this files
3. Burn it into the netbook?

All this while holding the "switch"

Thank you

17 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 15:20

Oto


Master
Master
>All this while holding the "switch"

Nice joke Very Happy No, no you will need to hold switch only while flashing

18 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 15:58

tavring


Thank you
I recently flash and wince 5.0 worked Very Happy Very Happy

I did get another problem!?

I can´t start the netbook with the power button!
Only when i use the USB-USB cable then it works fine.

I can´t shut wince 5.0 down only if i remove the cable?!

Thank you for your fast answer Very Happy

19 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 16:26

tavring


Flashing did work,

1.Another problem is that the keyboard don´t work at all!?!
2.Can´t start the netbook with power button,only with USB-USB cable
3.I use the USB-USB to start it, and have to remove it to shut it down!?

Please help me with this situation Shocked

thank you

20 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 19:36

Oto


Master
Master
Never heard of this before, strange. Have you tried a reset button? What netbook do you have, are you sure it is Anyka? You said that have taked it apart do you have some pictures what it looks like...

21 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 20:54

tavring


Yes i have tried the reset button,
pulling out the battery, reset and power on at the same time.

It´s very strange, It only starts when i plug in the USB-USB cable.

Yes i did disassemble it
[You must be registered and logged in to see this link.]
[You must be registered and logged in to see this link.]

thank you again

22 Re: From Sweden Need Help Please on Mon 13 Sep 2010 - 21:57

Oto


Master
Master
Trying my best Smile Hardware seems just like mine, next time if you dissasemble look under wireless card for mainboard number it may help others if you solve this. 1.9 ROM works great for me.

I can't help anymore as I have no idea why it doesn't turn on normally. Maybe try to reflash it again and double check all settings and which file goes where.

23 Re: From Sweden Need Help Please on Tue 14 Sep 2010 - 17:13

tavring


Hello

I took a look inside the netbook today.
And did find out that the keyboard wasn't connected correct.

But now the keyboard works Very Happy

But i can´t start the netbook with the power button?!?!
I tested it with no shell on it, nothing works
only when i have the USB-USB cable connect to a computer
it powers on, and it works fine without the USB-USB cable.
I downloaded opera mini and it runs good on the anyka netbook.

So i have to use the cable every time i turn the computer on bounce
I tried to flash it again but that did no work ether.

Here are some pic under the wifi card
[You must be registered and logged in to see this link.]

They burntool settings
[You must be registered and logged in to see this link.]
[You must be registered and logged in to see this link.]

Can somebody help me figure out the problem with the power button

Thank you for your time

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum