open mini netbook

open project of mini netbook, 7'' ARM netbook


You are not connected. Please login or register

arm926ej version1.90 nand formatted

Go to page : 1, 2  Next

View previous topic View next topic Go down  Message [Page 1 of 2]

1 arm926ej version1.90 nand formatted on Mon 29 Mar 2010 - 6:30

softdurga


Youngling
Youngling
sir i didnt understand any thing because no knwoledge please explain me in steps
like first what accories need for process next stepwise please you r my only hope

is any usefull like
Version 1.27 (26MB)
Version 1.63 (32MB)
Version 1.82 (27MB)
Version 1.86 (26MB)
from [You must be registered and logged in to see this link.]
please help meeeee pleaseeeeeee

2 Re: arm926ej version1.90 nand formatted on Mon 29 Mar 2010 - 15:34

scordoba


Hello softdurga.

what`s your problem?

After this , we can try to help you.

Best regards

3 Re: arm926ej version1.90 nand formatted on Tue 30 Mar 2010 - 7:41

softdurga


Youngling
Youngling
thnkoyu sir

4 sir this is my problem on Tue 30 Mar 2010 - 7:56

softdurga


Youngling
Youngling
i buy this from ebay and . due to my ignorence i press formatte on all drives on my computer now its showing only loading image . disabled pendrive installation lan installation wifi installation on starting it shows arm926ej version and peress f to updte after that directly comes loading please wait i didnt under stant what to do just using reset button to switch off .after studying some forums press f1 and after that there is some options formatted xip drive storage drive and unable to formatte nao notnd drive and update xip and update nand also not working what is my solution . will it work again .........plese healp me

5 Re: arm926ej version1.90 nand formatted on Tue 30 Mar 2010 - 8:13

scordoba


Ok.

You have seen from [You must be registered and logged in to see this link.]

1.- Do you remember what was the versión off your netbook?

If not; We will need to test all versions to find what will work in your netbook.

2.- We will think that your nebook uses version 1.86.

Then Download the compressed file and you can see how to repair in [You must be registered and logged in to see this link.] "Download" page.

Do you have trobles with some particular point?

Best regards

6 1,90 on Tue 30 Mar 2010 - 8:43

softdurga


Youngling
Youngling
version1.90 not1.86 still is it work?

7 Re: arm926ej version1.90 nand formatted on Tue 30 Mar 2010 - 8:54

scordoba


Well . Version 1.90 is not for CNMBook.


I made some "test" with my cnmBOOK
Is versión 1.63 and I tried to install versions 1.82 , 1.86 and 1.90 and it doesn`t work

What`s your netbook brand?. Is a CnmBook or oteher... If other ... please tell the name.

Best regards

8 Re: arm926ej version1.90 nand formatted on Tue 30 Mar 2010 - 9:45

churs82


scordoba, where you have found v1.90 firmware?
Who is manufacturer of notebooks with v1.90? I have bought noname notebook with ak7802 and can`t find firmware for it. Did you tried to mix firmwares, take xip from 1.86 or 1.90 and bootblock from your 1.63 version?

9 Re: arm926ej version1.90 nand formatted on Tue 30 Mar 2010 - 10:24

scordoba


I tried some mix. (Not all posible ones) but it didnt work. Rolling Eyes

If some of the work for you ,pplease share it... Very Happy

I don't remember where it was. But I'll put it in megaupload...

This is the link. "h ttp ://www.megaupload .com/?d=7DF3VZ0X" (please take out spaces to work)

Best regards



Last edited by scordoba on Thu 23 Sep 2010 - 10:05; edited 1 time in total

10 Re: arm926ej version1.90 nand formatted on Tue 30 Mar 2010 - 11:52

harmaf


scordoba wrote:
This is the link. [You must be registered and logged in to see this link.]

Great, I hope this will work for my Allfine PC703, too.
I have "bricked" it last week...

11 thanx sir on Tue 30 Mar 2010 - 13:01

softdurga


Youngling
Youngling
how to use firm ware 1.90 ...please explain procedure

12 i saw the procedure what is nipper on Tue 30 Mar 2010 - 14:05

softdurga


Youngling
Youngling
did we use any foreceps is apt

13 Re: arm926ej version1.90 nand formatted on Tue 30 Mar 2010 - 14:50

scordoba


Please softdurga.

Tell us your netbook`s manufacturer and wewill help you.

If it is CnmBook, Then you can use the program Burntool.exe otherwise it will not work.

Other manufacturers have other systems...
Best regards

14 Re: arm926ej version1.90 nand formatted on Tue 30 Mar 2010 - 23:25

churs82


softdurga, try to see the readme file.
scordoba, thank you very much for this firmware!

15 got succede on Wed 31 Mar 2010 - 8:01

softdurga


Youngling
Youngling
exellent mindblowing work thankyou friends i got it back this megaupload link but key pad not working



Last edited by softdurga on Wed 31 Mar 2010 - 10:03; edited 1 time in total

16 burntool usb notrecognised on Wed 31 Mar 2010 - 8:48

softdurga


Youngling
Youngling
windows 7 is not correct naa

17 i tried it in xp it worked on Wed 31 Mar 2010 - 13:09

softdurga


Youngling
Youngling
thank you scordoba.....thankyou so much can u inform how vob files played any codacs or players

any softwares worked on it

harmaf


Unfortunately allways when I connect the USB port of the netbook to the USB port of the PC with the burntool, the netbook tries to start and the burntool is unable to connect. Yes, I have short circuited the jumper for the firmware download according to the readme.
Has somebody an idea?
Best regards, harmaf

19 Re: arm926ej version1.90 nand formatted on Wed 31 Mar 2010 - 18:52

dave


thanks softdurga reat link worked fine for me
but it wont reboot.
can any one help

20 Re: arm926ej version1.90 nand formatted on Wed 31 Mar 2010 - 23:21

dave


hi im new to all this i installed 1.90v on my net book
it all works fine untit i shut down then it will not boot again i have to
install 1.90 every ime i shut down can anybody help please

21 it only works on xp on Thu 1 Apr 2010 - 7:44

softdurga


Youngling
Youngling
it only works on xp,

22 video playing on Thu 1 Apr 2010 - 7:49

softdurga


Youngling
Youngling
structed while playing AVi, mp4 can any one help me how to install kodaces

23 Re: arm926ej version1.90 nand formatted on Thu 1 Apr 2010 - 14:00

dave


im using xp can you help please


thanks dave

24 Re: arm926ej version1.90 nand formatted on Thu 1 Apr 2010 - 18:43

dave


harmaf on burntool check ddr not sdram
good luck

25 Re: arm926ej version1.90 nand formatted on Thu 8 Apr 2010 - 8:45

harmaf


dave wrote:harmaf on burntool check ddr not sdram
good luck

Unfortunately it boots up as soon as I connect the usb cable, even though I am shorting the indicated jumper. I think I will send it back to the shop where I have bought it.
Thank you,
Harald

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 2]

Go to page : 1, 2  Next

Permissions in this forum:
You cannot reply to topics in this forum